OPTISENS COND 7200

Conductive conductivity sensor for hygienic applications

  • For use with analytical transmitter
  • Process connection: Clamp DN25-40, 1½"
  • 0.05…1000 μS/cm; Max. +135°C / +275°F
  • Short or long version with stainless steel electrodes and Pt100 for temperature compensation

Product variants

OPTISENS COND 7200

OPTISENS COND 7200

Conductive conductivity sensor for hygienic applications

  • For use with analytical transmitter
  • Process connection: Clamp DN25-40, 1½"
  • 0.05…1000 μS/cm; Max. +135°C / +275°F
  • Short or long version with stainless steel electrodes and Pt100 for temperature compensation

Product variants

OPTISENS COND 7200

Overview

The OPTISENS COND 7200 is a sensor for conductive conductivity measurement in hygienic applications. It comes with two installation lengths (60 or 115 mm / 2.36 or 4.53”). The conductivity sensor features stainless steel sensor body and electrodes as well as an integrated temperature sensor (Pt100). Its fully sterilisable sensor design is particularly suitable for quality control in water conditioning or preparation in the food, beverage or pharmaceutical industry. For complying with strict sanitary standards, the surface of the sensor has a roughness of <0.8 μm. The OPTISENS COND 7200 operates with the MAC 100 or any suitable analytical transmitter.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Available with low cell constants (0.01 and 0.1 l/cm)
  • Fully sterilisable design
  • Surface roughness of <0.8 μm
  • Complies with FDA and EC1935/2004 regulations
  • Certificates for material, cell constant, surface roughness and FDA conformity
  • Low maintenance costs and a long life cycle
  • Available with 4-pin right-angle plug (Hirschmann) or M12 connector
  • With hygienic stainless steel body material
  • With integrated temperature sensor
  • For connection to the MAC 100 or any suitable analytical transmitter
Related products
MAC 100
Liquid analytical transmitter for measurements with sensors of the OPTISENS portfolio
  • Output: 3 x 4…20 mA, 3 relays (mechanical)
  • Input: max. 2 x sensor, 2 x temperature
  • -15…+55°C / +5…+131°F (ambient)
  • Robust housing for wall-mount installation
MAC 300
Liquid analytical transmitter for measurements with OPTISENS TSS, pH/ORP and COND sensors
  • Output: max. 6 x 4…20 mA, max. 6 x relay or optional Modbus
  • Input: up to 3 x sensor
  • -20…+50°C / +4…+122°F (ambient)
  • Robust housing for wall-mount or panel-mount installation
Email
Contact